Venstar T1700 Owner's Manual page 43

Using Emergency Heat
ENTER EMERGENCY HEAT: Only available if you have a Heat Pump
installed. To initiate the Emergency Heat feature, press the EMER
HT. button. The Cool setpoint display will read 'EH'
(emergency heat).
Press for
Emergency Heat
N EMRG HT. OUTD
10
OPERATION: During Emergency Heat operation the
thermostat will turn on the fan and the 2nd stage of heat
when there is a demand for heat. Also during Emergency
Heat the 1st stage of heating or cooling will be unavailable.
EXIT EMERGENCY HEAT: Follow the same steps as entering
Emergency Heat by pressing the EMER HT. button. During
Emergency Heat, only OFF and HEAT modes are available by
pressing the MODE button.
I2:00
73
Pm
74
H
EAT
Page 10.4