Connection To A Tv - Sylvania ZV450SL8 Owner's Manual

Digital video disc recorder with video cassette recorder

Hide thumbs Also See for ZV450SL8:

Specifications (1 page)

Owner's manual (110 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

Table of Contents

Make one of the following connections, depending on the capabilities of your existing device.

VCR and basic DVD connection

this unit

Available on DVD only

this unit

DVD

DIGITAL

AUDIO

S-VIDEO

AUDIO OUT

OUT

COAXIAL

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1

Please purchase the rest of the necessary cables at your local store.

After you have completed the connections

• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV's original

remote control that selects an external input channel until the DVD recorder's opening picture appears. Check your

TV owner's manual for details.

Note

• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be

distorted due to the copy protection system.

• You will not be able to hear the sound being output from DVD if you are not connecting DVD AUDIO OUT when

you made either S-video or component video out connection.

• When "Progressive" is set to "ON", no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

To set progressive scan mode, refer to page 91

• This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the

traditional output system. To utilize this feature, you must set "Progressive" to "ON".

E9H10UD.indd 18