Table of Contents
Advertisement
Troubleshooting
1.
The flash is not working.
The battery power is low.
The flash will be disabled when the battery is charging. (The camera is in DC power mode.)
In flash auto mode, camera flash fires ONLY when necessary (in dark setting as example).
2.
The files on the memory card do not display smoothly when the LCD shows the "!" marking.
The "!" means the SD card is low speed or is having wrong content inside. The way to solve this
condition is to format SD card by the camera instead of a PC (Please refer to the detailed Format
instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
3.
Why do some of my indoor photos look blurry and dark?
The camera extends photo exposure time under low light/ indoor condition. Keep the camera (and
the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
4.
How do I charge battery?
You must use the supplied AC charger or the USB cable. The camera must be turned OFF; blinking
light confirms charging, and the light becomes constant after the charging is completed.
In AC charging Mode, the light will turn itself off automatically after 3~5 minutes . The full charge
time is about 4 to 5 hours. (Actual charging time may vary. It depends on the battery conditions.)
The full charge battery usage for continuous Full HD (1080p 30) video recording is about 1.5~2
hours.
5.
After connecting the USB cable to the computer, ......
1.
The disk [DV] indicates the internal memory of the camera. (The disk label may be different
according to different model and PC OS.)
2.
[Removable Disk] indicates the external memory. (On the SD/SDHC/SDXC card in the camera)
3.
The disk [DVAP] indicates the built-in Internet Direct application is saved at this disk. It is protected
from formatting and deleting.
Troubleshooting
38
Section 10
EN
Hide quick links:
Advertisement
Table of Contents
