Lenovo ThinkPad X31 Troubleshooting Manual page 7
English - setup guide for the thinkpad x31
Hide thumbs
Also See for ThinkPad X31:
- Service and troubleshooting manual (136 pages) ,
- Guía de servicio y de resolución de problemas (120 pages) ,
- (118 pages)
Advertisement
9.
Replace the memory slot cover by aligning the back side of the cover first and then
tightening the screws.
Attention: When you have added or upgraded an SO-DIMM, do not use your
computer until you have closed the memory slot cover. Never use the computer
with the cover open.
10.
Put the battery back in place, turn the computer over again, and reconnect the
cables.
To make sure that the SO-DIMM is installed correctly, do as follows:
1.
Turn the computer on.
2.
While the "To interrupt normal startup, press the blue Access IBM button" message is
displayed at the lower-left of the screen, press the Access IBM button.
Double-click Start setup utility. The IBM BIOS Setup Utility screen appears. The
3.
"Installed memory" item shows the total amount of memory installed in your
computer. For example, if your computer has 256 MB of memory and you install a
256-MB SO-DIMM in it, the quantity shown in "Installed memory" should be 512 MB.
7
Advertisement
