Manually Focusing Subject; Focusing During Recording - Hitachi DZ-MV2000E Instruction Manual

Manually Focusing Subject

The DVD video camera/recorder usually focuses on a subject automatically (autofocus). You can also
manually focus a subject depending on the recording conditions.

FOCUSING DURING RECORDING

Normally, the DVD video camera/recorder automatically focuses the subject (autofocus), but you
can also manually focus a subject, depending on the recording conditions (manual focus).
Focusing range
You can switch the display mode of on-screen information:
• On T (tele) side: approximately 1 m from lens surface to infinity
• On W (wide) side: approximately 2 cm from lens surface to infinity
1
Press the FOCUS button during recording.
"MF" will appear on the screen.
Manual Focus icon
2
Press the zoom lever to "T" control side to
zoom in on subject.
3
Use the S R buttons to adjust the focus,
while viewing the image in the viewfinder or
on the LCD screen.
0 : 0 0 : 0 0
REM 0 MIN
8 : 0 0
FINE 0 / 9 / 2 0 0 6
FOCUS
:
Note
• Pressing FOCUS will alternate between manual focus
and auto focus. With auto focus, no indication will
appear on the screen.
• Be sure to zoom in on your subject before manually
focusing on it. If you bring the subject into focus at the
"W" control side, focus will be faulty when you turn the
zoom lever to the "T" control side to zoom in on the
subject.
• Manual focus is released when the DVD video
camera/recorder is turned off. When you turn the DVD
video camera/recorder on next time, auto focus will be
restored.
123
VOL.
Adjust with S and R buttons
67