Disc Or Card Management; Initialising Disc Or Card (Format Disc. Format Card) - Hitachi DZ-MV2000E Instruction Manual

Disc or Card Management

INITIALISING DISC OR CARD (FORMAT DISC. FORMAT CARD)

Initialising DVD-RAM disc or card will allow you to delete any recorded contents.
Before You Begin
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the f/e/d/c/A buttons to
choose "Format Disc" or "Format Card" on
the "Disc" or "Card" menu screen, and then
press the A button.
The screen for verifying "Format Disc" or
"Format Card" will appear.
4
Choose "YES", and then press the A
button.
Choose "NO" to cancel initialisation.
F o rma t D i s c
A l l d a t a w i l l b e d e l e t e d .
F o rma t t h e d i s c now ?
YES NO
ENTER
(When using
DVD-RAM disc)
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialisation. If the DVD video camera/recorder is turned off
during initialisation and the initialisation is interrupted, incorrect
initialisation will result and the incorrectly initialised disc will be
unusable.
• If you use a brand-new DVD-R disc, message "Disc is not formatted"
will appear: Initialise the disc, following the subsequent messages
(p. 42).
F o rma t Ca r d
A l l d a t a w i l l b e d e l e t e d .
F o rma t t h e ca r d now ?
YES NO
ENTER
(When using card)
:
Note
• If you wish to delete all recorded contents, it is
recommended that you use initialisation, which will
delete all the scenes in much less time than using the
scene delete function.
• Initialisation will delete all the recorded contents on
disc or card: Be careful not to delete data by mistake.
• It may not be possible to initialise a disc with many
scratches or dirt: Such a disc cannot be used (p. 25).
• This DVD video camera/recorder may not recognise
some discs or cards that have been initialised on PC
or a device other than this DVD video camera/
recorder.
13
121