Hitachi CX-40E(BS User Manual page 9

STEREO/MONO (FM only)
• When an FM stereo signal is too weak or noisy for stereo listening, set the switch [29]
to the MONO position to reduce the noise.
BEAT CUT (MW and LW only)
• If beat noise is audible during the recording from an MW or LW radio programme,
switch button [29] over from [A] to [B] or from [B] to [A] to reduce the noise.
TAPE RECORDER SECTION
Use only NORMAL tapes in the cassette deck of this sound system. The characteristics
of the cassette deck mechanisms do not match other types of tape.
REWIND (¡) AND FAST FORWARD (1) BUTTONS
To rewind the tape, press the REWIND button [8]. To rapidly advance the tape, press the
F.FWD button [9]. To stop rewinding or fast forwarding, press the STOP/EJECT button [10].
PAUSE BUTTON (8)
To halt the tape temporarily during recording or playback, press the PAUSE button [11]. To
release the pause mode, press the PAUSE button [11] again.
STOP/EJECT BUTTON (70)
When this button is pressed with the tape running, the tape stops. When it is pressed in the
stop mode, the cassette holder opens.
VARIABLE MONITOR
During recording, adjustment of volume is unnecessary. A programme may by heard at any
desired volume, and the setting of the BASS BOOST Button [15] does not affect the volume
because of the "Variable Monitor" device.
CD PLAYER SECTION
4/1 AND ¡/¢ BUTTON
Skip playback
By pressing briefly the ¡/¢ [19] or 4/1 [20] buttons, you can skip to a next or
previous title, or you can select a track before starting playback.
A. During PLAY
– You can skip to the next title by pressing the ¡/¢ button once. If you want to skip
more than one track, press the ¡/¢ button more than once until the display shows
the desired track number.
9