Table of Contents
Advertisement
Specifying the point to jump
to
Select "Specify" in step
"Jumping to the designated scene"
(p.58), then press the confirmation
button.
The specify screen will appear.
Total recording time of
all selected scenes
Position of currently
1
played back image
Go To
CURRENT
Go To
ENTER
TOP
Cursor
Select the desired point by time by
pressing
/
:
To select the beginning
:
To select the end
/
once:
To move the cursor one
minute back or forward
for HDD (ten seconds for
DVD, one still for card)
Press and hold
To move the cursor in ten
2
minutes increments for
HDD (one minute for
DVD, ten stills for card)
Go To
CURRENT
Go To
ENTER
TOP
(When the start of the
selected scene is selected)
in
END
RETURN
Cursor position
/
/
.
/
:
END
RETURN
Press the confirmation button.
The camcorder will go to the
specified point and enter playback
3
pause mode.
• To start playback, press the
confirmation button again.
Hints
• To cancel the "Go To" procedure
midway, press
the specified point.
• With a card, the number of stills
will appear at the "Top", "Current",
"End", and "Go To" indicators.
Note
The cursor position is a rough
estimate. The cursor may not move
at even intervals.
before going to
59
Advertisement
Table of Contents
