Door Locks; Manual Door Locks - Chrysler 300 Owner's Manual

30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Stop button is installed in the ignition switch, otherwise,
insert the Key Fob into the ignition switch and turn to the
RUN position. Refer to the "Passive Entry System — If
Equipped" under "Door Locks" for more information.
NOTE:
• For vehicles not equipped with Keyless Go feature, the
ignition switch must be in the ON position in order to
drive the vehicle.
• For vehicles not equipped with Keyless Go feature, the
message "Insert Key/Turn To On" will display in the
EVIC until you insert the Key Fob. Once inserted, the
message "Turn To On" will display in the EVIC until
you turn the Key Fob to ON.
• For vehicles equipped with Keyless Go feature, the
message "Push Button/Insert Key" will display in the
EVIC until you push the START button.

DOOR LOCKS

Manual Door Locks

To lock each door, push the door lock plunger on each
door trim panel downward. To unlock each door, pull the
door lock plunger on each door trim panel upward.
Door Lock Plunger