Section 4: To The Owner; Section 5: Contents Of Carton - MTD OEM-190-602 Operator's Manual

SECTION 4: TO THE OWNER

Model 601 and Model 602 Twin Rear Bagger Kits are grass collection systems designed for use on
AutoDrive Lawn Tractors equipped either a 42-inch cutting deck (Model 601) or a 46-inch cutting deck
™
(Model 602) only.
The instructions in this manual are divided into sections. Carefully read all sections and study the illustrations
to ensure proper installation and usage of this attachment. Read and observe all WARNING and CAUTION
statements. They are included to provide for the protection of the equipment installer and user, and to ensure
the prolonged service life of the equipment.
NOTE:
References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in
the operator's position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.

SECTION 5: CONTENTS OF CARTON

Before beginning installation, remove all parts from the carton to make sure everything is present. Carton
contents are listed below and shown in Figure 4. Hardware part number are shown in parentheses.
One Chute Tube
One Discharge Tube Assembly
One set of Blades (Model 602 only)
Two Grass Bag Assemblies
One Grass Catcher Cover Assembly
One Bracket Assembly
Chute Tube
Discharge Chute
Assembly
Bracket Assembly
Bag Assemblies
One hardware pack containing the following:
A: Two Shoulder Bolts (738-1020)
B: Two Bell Washers (736-0407)
C: Two Flange Lock Nuts (712-0459)
D: One Clevis Pin (711-0309)
E: One Hairpin Clip (714-0117)
Blades
(Model 602 Only)
Figure 4
6
Cover Assembly
Support Tube
(attached to cover)
Hardware Pack Contents
A D
B E
C