MTD 601 Operator's Manual
  1. Manuals
  2. Brands
  3. MTD Manuals
  4. Lawn Mower
  5. 601 Series
  6. Operator's manual
MTD 601 Operator's Manual

MTD 601 Operator's Manual

Automatic lawn tractor
Hide thumbs Also See for 601:

Advertisement

Available languages

Available languages

Table of Contents

See also: Owner's Manual
Operator's Manual
Automatic Lawn Tractor
Model 601
IMPORTANT:
READ SAFETY RULES AND INSTRUCTIONS
CAREFULLY
Warning:
This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered,
brush-covered
or grass-covered
land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or
state laws (if any), If a spark arrester is used, it should be maintained in effective working order by the operator, In the State of California
the above is required by law (Section 4442 of the California Public Resources Code), Other states may have similar laws, Federal laws
apply on federal lands, A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the
service department,
P,O, Box 361131 Cleveland, Ohio 44136-0019,
MTD LLC, P.O. BOX 361131 CLEVELAND,
OHIO 44136-0019
PRINTED IN U.S.A.
FORM NO. 769-01645
(1/13/2005)

Advertisement

Table of Contents
loading

Related Manuals for MTD 601

Summary of Contents for MTD 601

  • Page 1 A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P,O, Box 361131 Cleveland, Ohio 44136-0019, MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 FORM NO. 769-01645 PRINTED IN U.S.A.

  • Page 2: Table Of Contents

    TABLEOFCONTENTS Content Page Content Page Customer Support Maintaining Your Lawn Tractor Important SafeOperation P ractices Service Slope Gauge Off Season Storage Tractor S et-Up Attachments & Accessories Know YourLawn Tractor Troubleshooting Operating Y ourLawn Tractor Parts List Making Adjustments Espanol FINDINGMODELNUMBER This Operator's Manual is an important part of your new lawn tractor.

  • Page 3: Important Safeoperation P Ractices

    SECTION 1: IMPORTANT SAFEOPERATION P RACTICES WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 23. Muffler a ndengine become hotandcancause a Follow the manufacturer's recommendations burn. D onottouch. wheel weights or counterweights to improve 24. Check overhead c learances c arefully b efore driving stability. under lowhanging treebranches, wires, d oor Use extra care with grass catchers or other openings e tc.,where theoperator m aybestruck or attachments.
  • Page 5 Gasoline is frame, your unit should be serviced professionally extremely flammable and the vapors are explosive. by an authorized MTD Service Dealer. Serious personal injury can occur when gasoline is Check brake operation frequently as it is subjected spilled on yourself or your clothes which can ignite.
  • Page 6 8. Never t amper w iththesafety interlock s ystem or Forsafety protection, frequently c heckcomponents othersafety devices. Check theirproper o peration andreplace immediately withoriginal e quipment regularly. manufacturer's (O.E.M.) parts only,listedinthis 9. Afterstriking a foreign object, s toptheengine, manual. "Useofpartswhich donotmeet t he disconnect thesparkplugwire(s) a ndground original e quipment specifications maylead to against theengine.
  • Page 7 Sight and h01d this levelwith a vertical tree,,, >, or a corner of a building,,, ,,_ _ or a fence post 15° £)_ >, >, £)_ 15° WARNING &J Do not mow on inclines with a slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet). A riding mower could overturn and cause serious injury.
  • Page 8 SECTION 3: TRACTOR SET-UP Attaching theBatteryCables Service the engine with gasoline and oil as instructed in the separate Briggs & Stratton Operator/Owner Manual packed with your tractor. Read instructions carefully. NOTE: The positive battery terminal is marked Pos. (+). The negative battery terminal is marked Neg. (-). IMPORTANT: Your tractor is shipped with motor oil in the engine.
  • Page 9 SECTION 4: KNOW YOUR LAWNTRACTOR NOTE: Steering Wheel not shown for clarity, Figure 3 Systems Indicator Monitor Throttle Lever PTO (Blade Engage) Lever Cruise Control Button Choke Knob Ignition Switch Module Parking Brake Button Brake Pedal Shift Lever Drive Pedal Cup Holder Deck Lift Lever NOTE:...
  • Page 10 ThrottleControl L ever IgnitionSwitchModule The throttle control lever is located on the right side of WARNING: Never leave a running machine the tractor's dash panel. This lever controls the speed unattended. Always disengage PTO, move of the engine. When set in a given position, the throttle shift lever into neutral position, set parking will maintain a uniform engine speed.
  • Page 11 Systems Indicator Monitor PTO(BladeEngage) Lever Your tractor is equipped with a ammeter as part of its systems indicator monitor. Locate the monitor on the left side of your dash panel and compare it to Figure 6. ENGAGE / BLADE The PTO (Blade Engage) lever is located on the left side of the dashboard next to the steering wheel.
  • Page 12 NOTE: Cruise control can NOT be engaged at the tractor's fastest ground speed. If the operator should WARNING attempt do so, tractor will automatically decelerate to the fastest optimal mowing ground speed. AVOID SERIOUS INJURY ORDEATH Shift Lever • GO UP AND DOWN SLOPES, NOT ACROSS.

  • Page 13: Tractor S Et-Up

    ON while should ever malfunction, do not operate the tractor. activated. See Figure 8. Contact an authorized MTD service dealer. Once activated (indicator light ON), the tractor can • The safety interlock system prevents the engine...
  • Page 14 SettingtheCutting Height • If the blades are engaged, place the PTO (Blade Engage) lever in the disengaged (OFF) position. Select the height position of the cutting deck by placing • Turn the ignition key counterclockwise to the STOP the deck lift lever in any of the six different cutting height position.
  • Page 15 Avoid stopping when driving up a slope. If it is Using the DeckLift Lever necessary to stop while driving up a slope, start up To raise the cutting deck, move the deck lift lever to the smoothly and carefully to reduce the possibility of left, then place it in the notch best suited for your flipping the tractor over backward.

  • Page 16: Making Adjustments

    SECTION 6: MAKING ADJUSTMENTS Sideto Side adjustments while engine is running, If the cutting deck appears to be mowing unevenly, a WARNING: Never attempt to make any except where specified in the operator's side to side adjustment can be performed. Adjust if manual.
  • Page 17 If the tractor does not come to a complete stop when Steering Adjustment the brake pedal is completely depressed, or if the If the tractor turns tighter in one direction than the other, tractor's rear wheels can roll with the parking brake or if the ball joints are being replaced due to damage or applied, the brake is in need of adjustment.

  • Page 18: Maintaining Your Lawn Tractor

    SECTION 7: MAINTAINING YOUR LAWNTRACTOR • Refill the engine with new motor oil. WARNING: Before performing maintenance or repairs, disengage PTO, IMPORTANT:Refer to the Briggs & Stratton Operator/ move shift lever into neutral position, Owner Manual packed with your unit for information parking brake, stop engine and remove key to regarding the quantity and proper weight of motor oil.

  • Page 19: Service

    SECTION 8: SERVICE Cutting DeckRemoval • Gently slide the cutting deck (from the right side) out from underneath the tractor. To remove the cutting deck, proceed as follows: • Place the PTO (Blade Engage) lever in the Tires disengaged (OFF) position and engage the parking brake.
  • Page 20 • Place a block of wood between the center deck Jump Starting housing baffle and the cutting blade to act as a stabilizer. See Figure 16. battery, follow these instructions WARNING: When removing or installing • Use a 15/16" wrench to remove the hex flange nut prevent the screwdriver from shorting against that secures the blade to the spindle assembly.
  • Page 21 When replacing the blade, be sure to install the blade with the side of the blade marked "Bottom" (or with a pinching injury. Do not place your fingers on WARNING: Avoid possibility part number stamped in it) facing the ground when the the idler spring or between the belt and a mower is in the operating position.

  • Page 22: Off Season Storage

    SECTION 10: ATTACHMENTS & ACCESSORIES The following attachments and accessories are compatible for the Model 601 Lawn Tractor. See the retailer from which you purchased your tractor, an authorized MTD Service Dealer or phone (800) 800-7310 for information regarding price and availability.

  • Page 23: Troubleshooting

    SECTION 11: TROUBLESHOOTING Corrective Action Trouble Possible Cause(s) Engine fails to start PTO engaged. Place PTO lever in disengaged (OFF) position. Parking brake not engaged. Engage parking brake. Spark plug wire(s) disconnected. Connect wire(s) to spark plug(s). Throttle control lever not in correct Place throttle lever to FAST position.
  • Page 24 NOTES...
  • Page 25 SECTION 12: ILLUSTRATED P ARTS LIST (for throttle) (for choke)(_ REF. PART REF. PART DESCRIPTION DESCRIPTION 710-0227 751-0535 Fuel Line Hose Screw, #8-18 x.50 710-0599 Screw, 1/4-20 x.50 751-0564A Muffler Deflector 710-0726 751-0616A Screw, 5/16-18 x.750 Muffler, Twin Inlet 710-1237 751-0650B Screw, #10-32 x.625 RH Exhaust Pipe...
  • Page 26 Model601...
  • Page 27 Model601 REF. PART DESCRIPTION 710-04095 Hex Screw, 3/8-16, 1.00, Gr5 710-0514 Hex Screw, 3/8-16, 1.00, Gr5 710-0643 Hex Screw, 5/16-18, 1.00, Gr5 711-1408 Link, Drag, RH 711-1409A Link, Drag, LH 712-0214 Nut, Hex Lock, 3/8-24 712-04065 Nut, Flange Lock, 3/8-16, Grf, Nylon 712-0459 Nut, Flange Lock, 7/16-20 712-3004A...
  • Page 28 Model601 \\\\\\\\ F ..
  • Page 29 Model601 Ref. Ref. Part Part Description Description 710-0726 Screw, 5/16-12 x.750 731-04215 Cruise Control Button 710-0599 731-04217 Self-tapping Screw, 1/4-20 x.5 Parking Brake Button 710-0751 736-0142 Flat Washer, 9/32 x 1/2 x 1/16 Hex Cap Screw, 1/4-20 x.62 746-1086 Throttle Control/Cable 747-1196 Brake/Cruise Pivot Rod 746-1085A...
  • Page 30 Model601 i!i!i_ Left Hand Transmission Bolt Mounting...
  • Page 31 Model601 REF. PART REF. PART DESCRIPTION DESCRIPTION 17840 712-3004A Mounting Bracket, Transaxle Nut, Flange Lock, 5/16-18, Gr5 725-04039 732-0335 Switch, Interlock Spring, Compression,.405 x 1.17 17962 732-0955 Plate, Switch Spring, Extension,.50 OD x 1.41 647-04020 732-0963 Lever Assembly, Shift Spring, Extension,.50 OD x 6.37 710-0607 735-0662...
  • Page 32 Model601 IMPORTANT: For a proper d_ ....working machine, use Factory Approved Parts. V-belts are designed to engage and disengage safely. A substitute (non OEM) V-belt can be dangerous by not disengaging completely.
  • Page 33 Model601 PART REF. PART DESCRIPTION DESCRIPTION 17962 747-1112D Plate, Switch Engagement Handle, Deck 647-0064 748-0415B Lever Assembly, Engagement Spacer,.385 ID x.635 OD x 1.54 683-0302 750-0956 Plate Assembly, Engagement Spacer, 1.010 x 1.400 x.825 710-0224 756-04142 Screw, #10-16, 0.500 Pulley, Engine, 3.39 x 6.12 Diameter 710-0276 756-0487 Screw, Carriage, 5/16-18, 1.00...
  • Page 34 Model601 Modelsw/Manually AdjustingSeat Models w/Quick Adjust Seat f _\z .._q _ LI_.._\\\\\\ ....••_, _. <ii_2!ii!iiiiiii_iiiii_ ¸¸¸_¸...
  • Page 35 Model601 REF. PART REF. PART DESCRIPTION DESCRIPTION 710-1268 783-04314A Fender Screw, #10-16 x.375 712-04063 783-1010A Nut, Flange Lock, 5/16-18, GrF, Nylon Plate, Deck Lift 712-3027 783-1489A Nut, Flange Lock, 1/4-20 Mounting Bracket, Seat 720-0309A 710-0227 Seat Adjuster Grip Screw, #8-18 x.50 726-0201 726-0279 Nut, Speed,.3125...
  • Page 36 Model601...
  • Page 37 Model601 REF. PART DESCRIPTION 732-0614 Ring, Wire 716-0231 Ring, E Type,.750 736-0336* Flat Washer, 5/8 x 1.0 x.030 736-0337* Flat Washer, 5/8 x 1.0 x.040 736-0349* Flat Washer, 5/8 x 1.0 x.020 736-0335 Washer, Thrust.635 x 1.26 x.06 710-1325 Self-tapping Screw, 1/4-20 x 1.625 719-04017 Upper Housing 711-1109...
  • Page 38 Model601 \\\\ \\\x L ..,j_, : i2_ ®...
  • Page 39 Model601 PART REF. PART DESCRIPTION DESCRIPTION 17116 732-0594A Brake Assembly, Deck Spring, Extension,.91 Dia x 7.33 17258D 732-04197 RH Belt Cover, Deck 46" Spring, Extension,.68 OD x 5.00 Lg 618-0240A 734-0973 Spindle Assembly, 5.00 Dia. Wheel, Deck 5.0 x 1.38 618-04134B 736-0119 Spindle Ass'y, Double Pulley...
  • Page 40 MANUFACTURER'S LIMITED WARRANTY FOR: The limited warranty set forth below is given by MTD LLC with MTD does not extend any warranty for products sold or respect to new merchandise purchased and used in the exported outside of the United States, its possessions United States, its possessions and territories.
  • Page 41 Io contrario, usted puede comunicarse con el departamento de servicios, P.O. Box 361131 Cleveland, Ohio 44136-0019. MTD LLC. APARTADO POSTAL 361131 CLEVELAND, OHIO 44136-0019 IMPRESO EN ESTADOS UNIDOS DE AME_RICA FORMULARIO N °...
  • Page 42 iNDICE Jndice P_gina Indice P_gina Asistencia alcliente Mantenimiento de su tractor corta cesped Medidas importantes deseguridad Servicio Indicador dependiente Almacenamiento fuera de temporada Montaje del t ractor Aditamentos y accesorios Conozca sutractor corta cesped Soluci6n de problemas Opere s utractor corta c_sped Lista ilustrada de piezas Realizaci6n deajustes...
  • Page 43 SECCIONI:MEDIDAS IMPORTANTES D ESEGURIDAD ADVERTENCIA: La presencia de este simbolo indica que se trata de instrucciones importantes de seguridad que debe respetar para evitar poner en riesgo su seguridad personal y/o material y la de otras personas. Lea y siga todas las instrucciones en este manual antes de iniciar la operaci6n de esta maquina.
  • Page 44 No haga cambios a neutral para descender. El exceso de este manual, sea cuidadoso y use el sentido comQn. velocidad podria hacer que el operador pierda el control Contacte al centro autorizado de servicio MTD para de la m_tquina,ocasionando lesiones graves e incluso la obtener ayuda.
  • Page 45 Para evitar accidentes al operar en marcha Nunca saque la tapa del combustible ni agregue combustible mientras el motor estercaliente o en atr_s, desenganche las cuchillas antes de colocar reversa. El "Modo de Precauci6n en marcha. Deje que el motor se enfrie por Io menos Reversa"...
  • Page 46 Nunca intente violar el sistema de bloqueo de seguridad todos los componentes y reempl_tceloss61ocon piezas u otros mecanismos de seguridad. Verifique de los fabricantes de equipos originales listadas en este regularmente si funciona de manera correcta. manual. "La utilizaci6n de piezas que no cumplan con las Despu_s de golpear contra algQnobjeto extraSo, especificaciones de equipos originales podria tener detenga el motor, desconecte el cable de la bujia y...
  • Page 47 Sight and h01d this levelwith a vertical tree,,, or a corner of a building,,, ,,_ _ or a fence post 15° "-- t-" 15° ADVERTENCIA No pode en inclinaciones mayores a 15 grados (elevacion aproximada de 2 1/2 pies por cada 10 pies). Una podadora en movimiento podria voltearse...
  • Page 48 SECCION3: M ONTAJE DELTRACTOR Instalaci6n de loscablesde la bateria entrega por separado, embalado con su tractor corta cesped. Lea cuidadosamente las instrucciones. NOTA: El terminal positive de la baterfa esta marcado IMPORTANTE: Su tractor corta cesped se env[a con come Pos (+). El terminal negative de la baterfa esta marcado aceite en el motor.
  • Page 49 SECCION4: C ONOZCA S UTRACTOR CORTA ClaSPED NOTA: ..No se muestra el volante para mayor claridad, Figura 3 Monitorindicadordesistemas Palancadelregulador Bot6n de control decrucero Palanca de corte de energfa (enganche de cuchilla) Perillade obturaci6n M6dulo del interruptor de encendido Bot6n delfreno de mano Pedaldelfreno Palancadecambios...
  • Page 50 Palanca decontrol delregulador M6dulodel interruptor d eencendido La palanca de control del regulador esterubicada en el lado derecho del tablero de instrumentos del tractor. Esta palanca funcionamiento vigilancia. Corte controla la velocidad del motor. Cuando se coloca en una ADVERTENCIA: Nunca deje la ma.quina siempre la energ[a,...
  • Page 51 Monitorindicador desistemas Palanca decorte deenergia PT0 (enganche decuchilla) Su tractor esterequipado con un amperimetro, que forma parte del monitor indicador de sistemas. Localice el monitor en el lado izquierdo de su tablero de instrumentos y comp_trelocon laFigura 6. ON"_ OFF,_ / BLADE ENGAGE Aceite...
  • Page 52 Presione el pedal del freno o el pedal de la transmisi6n para desactivar el control de crucero. Consulte la secci6nActivaci6n delcontroldecruceroen la p_.gina55 de este manual para ADVERTENCIA obtener instrucciones detalladas sobre la funci6n de control de crucero. EVITELESIONES P ERSONALES GRAVES Y LAMUERTE NOTA: El control de crucero NO podra activarse a la •...
  • Page 53 Contacte a un m6dulo de la Ilave de contacto estarAencendida (ON) distribuidor MTD autorizado para el mantenimiento. mientras permanezca activado el Modo de Precauci6n •...
  • Page 54 • Gire la Ilavede encendidoen sentidocontrarioal de las Configuraci6n d e la alturade corte agujasdel reloj hastala posici6nSTOP(detenci6n). Seleccione la altura de corte de la cubierta de corte • Retirela Ilavede encendidodel interruptorpara evitarque colocando la palanca de elevaci6n de la cubierta en alguien enciendaaccidentalmenteel motor.
  • Page 55 Activacibn delcontroldecrucero Utilizacibn de la palancadeelevacibn de la cubierta • Coloquela palancade cambiosen la posici6nFORWARD (AVANCE)y luego presionelentamenteel pedal de la Para elevar la cubierta de corte, mueva la palanca de transmisi6nhasta obtenerla velocidaddeseada. elevaci6n de la cubierta hacia la izquierda y col6quela en la •...
  • Page 56 SECCION6: R EALIZACION D EAJUSTES ADVERTENClA: Nunca intente realizar Nivelaci6n lade a lade algt_n tipo de ajuste mientras el motor esta. Si la cubierta de corte estuviera realizando la poda de forma encendido, excepto los ajustes especificados despareja, puede realizarse un ajuste lado a lado. De ser en el manual del operador.
  • Page 57 la transmisi6n, en la parte posterior del tractor. De ser Ajustedelvolante necesario, realice un ajuste de la siguiente manera: Si le cuesta girar el tractor en una direcci6n m_tsqueen la • Mirandola transmisi6ndesde el lado derechodel tractor, otra, o si se reemplazan las r6tulas debido a daSos o Iocaliceel resortede compresi6ny el disco del freno.
  • Page 58 SECCION7: MANTENIMIENTO DESUTRACTOR C ORTA ClaSPED Propietario/OperadorBriggs & Stratton,que viene embalado con la unidad. mantenimiento o reparaciones, corte siempre la ADVERTENClA: Antes de realizar tareas de Siga los pasos anteriores en el orden contrario una vez que energia, mueva la palanca de cambios a la se ha terminado de drenar el aceite.
  • Page 59 SECCION8: M ANTENIMIENTO Extracci6n de la cubiertade corte • Deslicesuavementela cubiertade corte haciala parte delanteradel tractor,permitiendoque los ganchosde la Para extraer la cubierta de corte, proceda de la cubierta sesuelten de la varilla estabilizadora. siguiente manera: • Deslicesuavementela cubiertade corte (desdeel lado •...
  • Page 60 Arranquecon cables Utiliceuna Ilavede 15/16"paraextraerla tuercade brida hexagonalque fija la cuchillaal montajedel husillo. Vea la Figura16. instale la bateria, siga estas instrucciones Tuerca de ADVERTENCIA: Cuando extraiga para impedir que el destornillador provoque rida un cortocircuito contra el marco. IMPORTANTE: Nunca haga arrancar la bater_a descargada de su tractor con la bateria de un vehiculo en marcha.
  • Page 61 IMPORTANTE: Utilice una Ilave de torsi6n para ajustar la Todas las correas de su tractor estan sujetas a desgaste, y se tuerca de brida hexagonal del husillo de la cuchilla las debe cambiar si se presentan signos de desgaste. hasta entre 70 pies-libras y 90 pies-libras. IMPORTANTE:Las correas en V de su tractor esta.n diseSadas especialmente para que se engranen y Fusibles...
  • Page 62 Los siguientes aditamentos y accesorios son compatibles con el Tractor Corta Cesped Modelo 601. Consulte al minorista a quien le adquiri6 su tractor, a un distribuidor autorizado MTD o al telefono (800) 800-7310 para obtener informaci6n sobre precios y disponibilidad.
  • Page 63 SECCION11: SOLUCION DEPROBLEMAS Problema Acciones correctivas Causa(s) posibles El motor no arranca El sistema de corte de energia esta en Coloque la palanca de corte de energia (PTO) en la posici6n posici6n de suministro de energia de corte de energia (OFF). Coloque el freno de mano.
  • Page 64 NOTAS...
  • Page 65 SECCION12: LISTAILUSTRADA DEPIEZAS (para el regulador) (para la obturaci6n)(_ N ° N ° N ° N ° DESCRIPClON DE REF DESCRIPClON DE REF DE PIEZA DE PIEZA 710-0227 751-0535 Tornillo #8 -18 x 0,50 Manguera de la linea de combustible 710-0599 Tornillo, 1/4-20 x 0,50 751-0564A...
  • Page 66 Modelo601...
  • Page 67 Modelo601 N ° N ° DE PIEZA DESCRIPClON REFE 710-04095 Tornillo hexagonal, 3/8-16, 1,00, Gr5 710-0514 Tornillo hexagonal, 3/8-16, 1,00, Gr5 710-0643 Tornillo hexagonal, 5/16-18, 1,00, Gr5 711-1408 Acoplamiento, Barra de, LD 711-1.409A Acoplamiento, Barra de, LI 712-0214 Tuerca, De seguridad hexagonal, 3/8-24 712-04065 Tuerca, De seguridad de brida, 3/8-16, Grf, Nylon 712-0459...
  • Page 68 Modelo 601 \\\\\\\\ F ..
  • Page 69 Modelo 6 01 N° de N°de N°de N° de refer refer pieza Descripci6n pieza Descripci6n encia encia 710-0726 731-04215 Bot6n de control de crucero Tornillo, 5/16-12 x 0,750 710-0599 731-04217 Bot6n del freno de mano Tornillo autorroscante, 1/4-20 x 0,5 710-0751 736-0142 Tornillo de cabeza hexagonal, 1/4-20 x 0,62...
  • Page 70 Modelo601 i!i!i_ Left Hand Transmission Bolt Mounting...
  • Page 71 Modelo601 N ° N ° N ° N ° DE PIEZA DESCRIPClON DE PIEZA DESCRIPClON 17840 712-3.004A M6nsula de montaje, Transeje Tuerca, De seguridad de brida, 5/16-18, 725-04039 Interruptor, Dispositivo de bloqueo 17962 732-0335 Placa, Interruptor Resorte, Compresi6n, 0,405 x 1,17 647-04020 732-0955 Montaje de la palanca, Cambios...
  • Page 72 Modelo601 IMPORTANTE:Para que la maquina funcione de manera adecuada, use repuestos aprobados pot el fabricante. Las correas en V esta.n disehadas para que se engranen y desengranen sin nesgos. El uso de una correa en V sustituta (que no sea del fabricante del equipo original) puede resultar peligroso si la misma no se...
  • Page 73 Modelo601 N ° N ° N ° N ° DE PIEZA DESCRIPClON DE PIEZA DESCRIPClON REF. REF. 17962 747-04355 Placa, Interruptor Varilla de la guarda, Correa 647-0064 747-1112D Montaje de la palanca, Enganche Soporte de la manija, Cubierta 683-0302 748-0415B Montaje de la placa, Enganche Separador, 0,385 de diametro interno x 710-0224...
  • Page 74 Modelo601 Modelsw/Manually AdjustingSeat Models w/Quick Adjust Seat f_\z .._\\\\\\...
  • Page 75 Modelo601 N ° N ° N ° N ° DE PIEZA DESCRIPClON DE PIEZA DESCRIPClON REF. 710-1268 736-3078 Tornillo, #10-16 x 0,375 Arandela, Plana, 0,344 x 1,0 x 0,063 712-04063 783-04314A Defensa Tuerca, De seguridad de brida, 5/16-18, 783-1.010A GrF, Nylon Placa, Elevaci6n de la cubierta 712-3027 783-1.489A...
  • Page 76 Modelo601...
  • Page 77 Modelo601 N ° N ° DE PIEZA DESCRIPClON 732-0614 Anillo, Cable 716-0231 Anillo, Tipo E, 0,750 736-0336* Arandela plana, 5/8 x 1,0 x 0,030 736-0337* Arandela plana, 5/8 x 1,0 x 0,040 736-0349* Arandela plana, 5/8 x 1,0 x 0,020 736-0335 Arandela, De arrastre, 0,635 x 1,26 x 0,06 710-1325...
  • Page 78 Modelo601 \\\\ \\\x L ..,j_, : i2_ ®...
  • Page 79 Modelo601 N ° N ° N ° N ° DE PIEZA DESCRIPClON DE PIEZA DESCRIPClON REF. REF. 17116 732-0306A Montaje del freno, Cubierta Resorte, Compresi6n, 0,531 de diametro 17258D Cubierta de la correa LD, Cubierta 46" exterior x 1,75 618-0240A 732-0429A Montaje del husillo, 5,00 diam.
  • Page 80 El daSo resultante por la instalaci6n o el uso personas juridicas, incluidos los distribuidores o los de piezas, accesorios o uniones no aprobados por MTD para minoristas con respecto a los productos obligara a MTD. su uso con el(los) producto(s) incluido(s) en este manual Durante el plazo de la garantia el dnico recurso es la anulara la garanfia en Io que respecta a esos daSos.

Table of Contents