This is where your model number will be. XXX-X-XXX-X-XXX XXXXXXXXXXX This is where your serial number will be. Copy the model number here: MTD PRODUCTS INC Copy the serial number here: CLEVELAND, OHIO 44136 Figure 2 SECTION 2: CALLING CUSTOMER SUPPORT •...
SECTION 3: IMPORTANT SAFE OPERATION PRACTICES WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR LAWN MOWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
DO NOT: • Disengage all attachment clutches, thoroughly depress the brake pedal, and shift into neutral • Do not turn on slopes unless necessary; then, turn before attempting to start engine. slowly and gradually downhill, if possible. • Your mower is designed to cut normal residential •...
Page 5
• Replace fuel cap securely and wipe off any spilled • Grass catcher components are subject to wear, fuel before starting the engine as it may cause a damage and deterioration, which could expose fire or explosion. moving parts or allow objects to be thrown. For your safety protection,...
SECTION 4: TO THE OWNER Model 601 and Model 602 Twin Rear Bagger Kits are grass collection systems designed for use on AutoDrive Lawn Tractors equipped either a 42-inch cutting deck (Model 601) or a 46-inch cutting deck ™ (Model 602) only. The instructions in this manual are divided into sections.
SECTION 6: ASSEMBLY Warning: Before beginning installation, place the tractor on a firm and level surface. Place the PTO in the disengaged (OFF) position, stop the tractor engine and set the parking brake. Support Tube Rests Here Bell Washer Insert Support Tube Here 46-inch decks Bracket Assembly 42-inch decks...
Page 8
ATTACHING THE CUTTING BLADES IMPORTANT: Mount the smaller of the three (Model 602 Only) blades to the center spindle. The remaining two blades are interchangeable. WARNING: Cutting blades are sharp. Always protect hands by wearing heavy IMPORTANT: Use a torque wrench to tighten the leather work gloves to grasp blades.
SECTION 7: OPERATION GRASS BAG REMOVAL 1. To open the cover, simply lift up on cover. The chute tube assembly does not have to be removed. See Figure 10A. 2. To remove the grass bags, lift up on bag and unhook the frame of the bag from the support tube assembly.
MANUFACTURER’S LIMITED WARRANTY For TWO YEARS from the date of retail purchase Units exported out of the United States: The within the United States of America, its possessions manufacturer does not extend any warranty for and territories, the manufacturer will, at its option, products sold or exported outside of the United repair or replace, for the original purchaser, free of States of America, its possessions and territories,...
Need help?
Do you have a question about the OEM-190-602 and is the answer not in the manual?
Questions and answers