Page 1
Installation and Assembly - CRT Ceiling Mount Kit for 14" - 17" Monitors Model: IMC 18 IMPORTANT! Read entire instruction sheet before you WARNING start installation and assembly. IMPORTANT! This kit includes all mounting hardware for direct attachment to a wood joist ceiling. For •...
Page 2
From the top thread flush mount tube (R) through threaded fitting in ceiling plate (P). IMPORTANT: If you will install an extension column DO NOT INSTALL THE FLUSH MOUNT TUBE. For Wood Joist Finished Ceiling, Ex- posed Wood Joists, or Wood Beam Ceiling.
WARNING • Installer must verify that the ceiling will safely support four times the combined weight of all attached equip- ment and hardware. 5/16" (8 mm) For Concrete Ceilings drill four 5/16" (8 mm) dia. holes to a minimum depth of 1 3/4" (45 mm).
Page 4
First: Assemble bracket as shown. Leave all fasteners slightly loose to allow for adjustment. Second: From behind, insert monitor into bracket. Face of monitor should touch returns on left and right trays (N & O). Adjust height and width of bracket to fit snugly around monitor.