Removing The Touchpad Bracket - Packard Bell EasyNote LJ77 Service Manual

Removing the TouchPad Bracket

1. See "Removing the Upper Cover" on page 76.
2. Release the FFC locking latch and disconnect the TouchPad FFC from the cover.
3. Remove the single screw securing the TouchPad Bracket to the Upper Cover.
Step
TouchPad Bracket
4. Hold down the left side of the bracket as shown. Lift and pivot the right edge in the direction of the arrow to
release the locking latches on the front edge.
5. Remove the bracket from the Upper Cover.
80
Size
M2*3
Quantity
1
Screw Type
Chapter 3