Replacing The Touchpad Bracket; Replacing The Upper Cover - Packard Bell EasyNote LJ77 Service Manual

Replacing the TouchPad Bracket

1. Replace the TouchPad Bracket bottom edge first to
engage the securing clips (1). Rotate the bracket
on to the Upper Cover and press down as
indicated (2).
(2)
(1)
3. Insert the TouchPad FFC in to the connector as
shown.

Replacing the Upper Cover

1. Place the upper cover on the lower cover front edge first and lower the cover into position.
122
2. Secure the bracket to the Upper Cover with a single
screw.
4. Close the FFC locking latch to secure the cable in
place.
Chapter 3