Packard Bell EasyNote LJ77 Service Manual page 46

The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter
Advanced CPU
Control
Platform Power
Management
Break Event
ACPI S3
Wake on PME
Wake on Modem
Ring
Quickly S4
Resume
Auto wake on S5
36
Description
Enter the Advanced CPU Control menu.
Enter the Platform Power Management
menu.
Enter the Break Event menu
Enable or Disable ACPI S1/S3 Sleep State.
Disable or Enable wake up when the
system power is off and a PCI Power
Management Enable wake up event occurs.
Disable or Enable wake up when the
system power is off and a modem attached
to the serial port is ringing.
Disable or Enable optional quick boot from
S4 Resume.
Disable or Enable auto wake up by date
and time or at a fixed time everyday.
Submenu Items
• P-States (IST)
• Boot performance mode
• Thermal Mode
• CMP Support
• Use XD capability
• VT Support
• SMRR Support
• C-States
• Enhanced C-States
• C-State Pop Up Mode
• C-State Pop Down Mode
• C4 Exit Timing Mode
• Deep C4
• Hard C4E
• Enable C6
• EMITM
• Bi-directional PROCHOT#
• Dynamic FSB Switching
• Turbmo Mode
• ACPI 3.0 T-States
• DTS
• DTS Calibration
• Thermal Trip Points Setting
• PCI Clock Run
• Storage Break Event
• PCIE Break Event
• PCI Break Event
• EHCI Break Event
• UHCI Break Event
• HDA Break Event
N/A
N/A
N/A
N/A
N/A
Chapter 2