External Module Disassembly Process; External Modules Disassembly Flowchart - Packard Bell EasyNote LJ65 Service Manual

External Module Disassembly Process

IMPORTANT:The outside housing and color may vary from the mass produced model.

External Modules Disassembly Flowchart

The flowchart below gives you a graphic representation on the entire disassembly sequence and instructs you
on the components that need to be removed during servicing. For example, if you want to remove the main
board, you must first remove the keyboard, then disassemble the inside assembly frame in that order.
Remove
ODD
NOTE: Items enclosed with broken lines (— - - —) are optional and may not be present.
Screw List
Step
WLAN Module
ODD Module
ODD Bracket
Primary HDD Carrier
Secondary HDD Carrier
Chapter 3
Turn off system
and peripherals
power
Disconnect power
and signal cables
from system
Remove
Battery
Remove Remove
Dummy Cards Lower Covers
Remove Remove
DIMMs WLAN
Screw
M2*3
M2.5*5
M2*3
M3*3
M3*3
Remove
Primary HDD
Quantity
1 86.WBF02.003
1 86.WBF02.010
2 86.WBF02.003
4 86.WBF02.005
4 86.WBF02.005
Remove
Secondary HDD
Part No.
51