Table of Contents
Advertisement
Removing the LCD Bezel
1. See "Removing the LCD Module" on page 71.
2. Remove the four screw caps and six screws (four on the Bezel and two on the Hinge Covers).
Step
LCD Bezel
(red callout)
LCD Bezel
(green callout)
3. Starting from the top centre of the bezel, pry the bezel upwards and away from the panel. Move along the top
edge and down each side until all sides of the bezel are removed.
NOTE: If necessary, use a pry to lift up the outside edges of the bezel.
Chapter 3
Size
M2.5*5
M2*4
Quantity
4
2
Screw Type
97
Advertisement
Table of Contents
