Saddle And Seat Post; Inspection - PACIFIC CYCLE Part Instruction Manual

Seat Fixing Bolt
Micro Adjustable
Seat Post
Seat Clamp Nut
Standard
Seat Post
75

SADDLE AND SEAT POST

Inspection

The seat fixing bolt and the seat post binder bolt should be checked
for tightness and adjustment every month. On removing the seat post
from the frame, you will notice a mark about 65mm up from the
bottom with the words "max. height" or "minimum insertion".
To avoid damage to either the seat post, the frame
Seat Post
Binder Bolt
or possibly the rider, the minimum insertion mark
must be inside the frame.
Lubrication
Remove the seat post from the frame and wipe off any grease, rust or
dirt. Then apply a thin film of new grease to the part that will be inserted
into the frame. Re-insert, adjust and tighten the seat post in the frame.