Training Wheel Stabilizer Bracket - PACIFIC CYCLE Part Instruction Manual

It is very important to check the training wheel connection to the bicycle. Failure to properly tighten
may cause the training wheel to dislodge. Please contact Pacific Cycle Service with any questions.
61

Training Wheel Stabilizer Bracket

Your bicycle may include a stabilizer bracket to attach the train-
ing wheel to the bicycle.
First remove the nut and washer from the rear wheel axle.
Align the stabilizer bracket onto the brace. Align the brace and
stabilizer bracket on the wheel axle. Replace the axle nut and
washer, secure tightly. The elongated hole on the brace allows
for raising and lowering the training wheel to the proper height.
NOTICE: Not all bicycles will accept training wheels. If your
bike did not come stock with training wheels, please call Pacific
Cycle to help determine if after-market training wheels can be
attached.