Quick Release Levers - PACIFIC CYCLE Part Instruction Manual

QUICK RELEASE LEVERS

It is important to check the quick release levers before every ride to ensure all connections are made properly
and securely. Periodically, disassemble the mechanism from the bicycle and inspect for any wear or damage
and replace if necessary. When reinstalling, it is very important to ensure the connections are made properly.
Please refer to page 29-30 for the appropriate assembly instructions.
REFLECTORS
Your bicycle is supplied with one front (white), one rear (red), two wheel (white), and two pedal (orange)
reflectors. These are an important safety and legal requirement, and should remain securely fitted and in good,
clean conditions at all times. Periodically, inspect all reflectors, brackets and mounting hardware for signs of
wear or damage. Replace immediately if damage is found. Please see pages 12-13 for more information.
Reflectors
93
Reflectors
Wear reflective clothing
when riding.
Attach a light to your
bike if you ride at night.