Setting The Remote Control Code; Operating The Tv Of Sharp Using The Remote Control - Sharp BD-HP50X Operation Manual

Setting the Remote Control
Code
• 3 types of remote control codes operate this
Player: RC-1, RC-2 and RC-3. If you operate
this Player by remote control along with another
SHARP Blu-ray Disc Player or DVD Player placed
next to it simultaneously, switching the remote
control code (both the Player and remote control)
to one of the signals (RC-1, RC-2 or RC-3) will let
you operate only with this Player.
• Make sure to set the Player and remote control to
the same remote code. You can not operate the
Player if they are not set to the same code.
Setting the Remote Control
Code of the Remote
Example: Setting the code to "RC-3".
1
Press and hold 3 first and then
POWER on the remote control
together for more than 5 seconds.
2
Press POWER (on the player) to
turn off the player.
POWER
Setting the Remote Control
Code of the Player
3
Point the remote control at the
player, then press and hold the
DISPLAY button for more than 10
seconds.
Remote control sensor
4
Press POWER (on the remote
control) to turn on the player.
Before Starting Playback
Operating the TV of SHARP
Using the Remote Control
The Universal Remote Control may operate the
basic functions of the TV of SHARP.
TV function control
• TV Power: POWER
TV Channel up/down: CH r/s
•
TV Volume up/down: VOL e/f
•
• TV-AV Selector: INPUT
21