Download  Print this page

Partial Repeat Playback (Repeat Playback Of A Specified Part); Switching Audio; Switching Subtitles - Sharp BD-HP21X Operation Manual

Hide thumbs

Advertisement

Partial Repeat Playback
(Repeat Playback of a
Specified Part)
DVD VIDEO
DVD-R
DVD-RW
AUDIO CD
NOTE
Some operations in the following playback
function cannot be performed depending on the
specifications of the disc.
1
Press REPEAT during playback.
2
Press c/d to select "SCENE
SELECTION", then press ENTER.
PLAYBACK TITLE
PLAYBACK CHAPTER
3
"SET START POINT" displays.
Press ENTER at the scene where
you want.
"SET END POINT" displays.
4
Press ENTER at the scene where
you want to set the end point.
You can press V FWD to fast forward
to the scene where you want to set the
end point. When you reach the desired
scene, simply press I PLAY and then
ENTER to set the end point. To cancel
Repeat Playback, press REPEAT.
NOTE
Press LSKIP/l, the Repeat Playback is
cancelled and the next chapter being play back.
Press KSKIP/k once, the Repeat Playback
is cancelled and the player returns to the start of
current chapter (track).
If you press KSKIP/k again (within about 5
seconds) the player will skip to the beginning of the
previous chapter (track).
For Partial Repeat Playback, set the start and end
points within the same title.
Repeat Playback may be forbidden depending on
the disc.
Partial Repeat Playback may not work in multi-
angle scenes.
If you press DISPLAY, you can confirm the Repeat
Playback status.

Switching Audio

You can change the audio output channel using
AUDIO.
Each time AUDIO is pressed, the audio
channels (2 channels or multi audio)
change as follows:
BD VIDEO
The newly selected audio track will be
displayed.
DVD-RW
When a recorded broadcast with stereo or
monaural audio is played back:
"Stereo" is displayed. (Audio cannot be
switched.)
NOTE
When you play a programme recorded in stereo
or monaural, and if you are listening to the
BITSTREAM sound via the digital output jack, you
cannot select the audio channel. Set "AUDIO OUT"
to "PCM" (page 35), or if you want to change the
audio channel, listen via the analogue output jacks.
SCENE SELECTION
SET START POINT

Switching Subtitles

If subtitles are provided in multiple languages,
you can switch between them.
Press SUBTITLE during playback.
The display indicates the subtitle number
currently being played back, and the subtitles
appear.
Each time SUBTITLE is pressed, the
subtitles change.
"– –" is displayed if a disc has no subtitles.
You can also select "OFF".
Playback Functions
DVD VIDEO
DVD-R
29

Advertisement

Table of Contents
loading