Craftsman 917.271100 Owner's Manual page 32

TROUBLESHOOTING CHART
PROBLEM CAUSE
Loss of drive • Freewheel control in "dis-
engaged" position.
• Motion drive belt worn,
damaged or broken.
• Air trapped in transmis-
sion during shipment
or servicing.
I • u " n I • : Eng ne backf res Engine throttle control not
when turning set at "SLOW"
engine "OFF" position for 30 seconds
before stopping engine.
CORRECTION
• Place freewheel control in
"engaged" position.
• Replace motion drive belt.
• Purge transmission,
• Move throttle control to
"SLOW" position and allow
to idle for 30 seconds before
stopping engine.
32