Introduction - BC Biomedical ENDOCHECK Test system User Manual

EndoCheck™ Features
The EndoCheck™ Test System is a portable kit designed for qualitative and quantitative testing of
light sources and fiber light cables used in a rigid endoscopy environment, and is intended to be used
by trained service technicians. The kit does not check rigid endoscopes – only fiber cables & light
sources.
There are two primary parts to the kit:
•
The EndoProjector ™ is a precision optical component that yields an approximately 10X
magnification of the light signal coming out of the fiber cable. The image, when displayed on
a wall or other flat surface, generally allows the individual fibers to be observed, and thus
make a qualitative inspection of the fiber cable. The EndoProjector ™ also provides for
connection to a wide variety of fiber cables via its interchangeable connectors.
•
The 401025 light meter and light meter adapter, in conjunction with the EndoProjector ™,
provide for quantitative analysis of both the light source and the fiber cable. The light meter
reads in both lux and foot-candles.
I.

INTRODUCTION

2