Safety Precautions (To Hide 3D Safety Precautions); Using Function Button - Panasonic TH-103VX200U Operating Instructions Manual

Item
3D Emitter
Function button assign 1
Function button assign 2
3D Safety Precautions
Memory lock

Using FUNCTION button

Pressing the FUNCTION button activates one of the following fi ve functions. The settings of functions are
performed with the "Function button assign 1" and "Function button assign 2" on the OPTIONS menu. (see above)
The factory preset functions are as described below.
FUNCTION 1 Button: 3D SETTINGS
FUNCTION 2 Button: SIGNAL
3D SETTINGS / SIGNAL
The "3D SETTINGS" menu is displayed.
(Example: 3D SETTINGS)
3D SETTINGS
3D EYEWEAR
3D INPUT FORMAT
LEFT/RIGHT SWAP
SAFETY PRECAUTIONS
Pressing the FUNCTION button clears the menu.
SCROLLING BAR / TEST PATTERNS / BLUE ONLY
Confi rmation screen (Example: SCROLLING BAR)
FUNCTION 1
SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
To exit this mode, press any button.
BLUE ONLY
The screen displays only blue color for image adjustment.
To exit this mode, press FUNCTION button.
Note:
PC POWER MANAGEMENT and AUTO POWER OFF are deactivated during SCROLLING BAR or TEST PATTERNS operation. (see page 46)
Set the infrared transmitter for the 3D Eyewear.
INT: Use the infrared transmitter of the unit.
EXT: Use the external 3D IR TRANSMITTER (available separately.)
Set the function to operate when the FUNCTION button 1 to 2 on the remote control is pressed.
3D settings: The "3D SETTINGS" menu is displayed.
Scrolling bar: The screen saver activates, and after 15 minutes, the display power shuts down (standby).
Test patterns: The test pattern is displayed by switching among seven patterns.
Blue only: The screen displays only blue color for image adjustment.
Signal: The "SIGNAL" menu is displayed.
3D Safety Precautions show/hide is set during power ON.
On: 3D Safety Precaution is shown every time when the power is ON.
Off: 3D Safety Precaution is not shown when the power is ON.
When the setting changes from "On" to "Off", the confi rmation screen is displayed as below. Pressing
"YES" switches the setting.
Locks or unlocks saved profi les. Also for setting passwords. (see page 41)
ON
AUTO
OFF
SCROLLING BAR
YES N O
OPTIONS Adjustments
Adjustments
3D Safety Precautions
If Off is selected, the 3D safety precautions
will not be displayed when power is turned on.
Change Setting?
YES NO
Press to
select
The operation starts.
"YES".
Press.
TEST PATTERNS
Each time you press
Color Bars
Black
To exit this mode, press any button other than
, a different test pattern is displayed (seven in all).
Red Green
Frame
1% window (2 lines × 2 dots)
Blue
.
57