Connections; Ac Cord Connection And Fi Xing, Cable Fi Xing; Video Equipment Connection - Panasonic TH-42LF20U Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
Cable fi xing
Fix the cable in place using the bead band attached to the display.
Remove the bead band
1
Bead band

Video equipment connection

SERIAL
Control the Display by
connecting to PC.
(see page 13)
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
2 Bundle the cables
Remove
AV IN
HDMI1, HDMI2
HDMI Input Terminal
(see page 11)
AV IN
VIDEO
Composite Video Input Terminal
S-VIDEO
S-VIDEO Input Terminal
(see page 10)
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
3
Stopper
Bundle the cables
DVI-D IN
DVI-D Input Terminal
(see page 11)
PC IN
PC Input Terminal
(see page 12)
Attach the bead band
Pass through to
the back
COMPONENT/RGB IN
Component/RGB Video
Input Terminal
(see page 10)
9