Screensaver (For Preventing Image Retention) - Panasonic TH-42LF20U Operating Instructions Manual

SCREENSAVER
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
When the screen saver is operating, the following 5 patterns are displayed full screen for 5 seconds each.
Black→Dark Gray→Gray→Light Gray→White
1
2
3
MODE selection
4
START setting
30
(For preventing image retention)
Press to display the SET UP menu.
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the
MODE.
Press to select each
mode items.
When the MODE is set to ON, press to select START.
Press to start SCREENSAVER.
The menu screen will disappear and the SCREENSAVER will be activated. To stop the
SCREENSAVER under ON, press the R button or any buttons on the main unit.
Note: When the display is turned off, the SCREENSAVER will be deactivated.
Off
INTERVAL : Operates when SHOW DURATION and SAVER
DURATION are set up and those times arrive.
TIME OF DAY : Operates when START TIME and FINISH TIME
are set up and those times arrive.
STANDBY AFTER SCR SAVER : Operates while SCREENSAVER DURATION,
and display enters standby mode.
ON : Operates when START is selected and the
ACTION ( ) button is pressed.
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
WOBBLING OFF
COMPONENT/RGB-IN SELECT
RGB
POWER MANAGEMENT OFF
AUTO POWER OFF OFF
OFF ( SERIAL )
STANDBY SAVE
ECO
OFF
ENGLISH ( US )
OSD LANGUAGE
SCREENSAVER
PRESENT TIME OF DAY MON 0 : 02
START
OFF
MODE