SET UP for Input Signals
NOISE REDUCTION
Press to select "NOISE REDUCTION".
Press to select "OFF", "AUTO", "MIN", "MID", "MAX".
AUTO: NOISE REDUCTION will be automatically
Note:
NOISE REDUCTION can be adjusted while a Video or Component signal is being applied.
SYNC
This function operates only during input from PC IN terminal.
Select SIGNAL from the "SET UP" menu during Component input signal.
Press to select the "SYNC".
Press to adjust.
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input fi rst is selected.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "SYNC ON G".
40
selected from "MIN", "MID" or "MAX".
(
)
NOISE REDUCTION
OFF
[ RGB ]
SIGNAL
SYNC
AUTO
3 : 2 PULLDOWN
OFF
XGA MODE
1024
×768