Remote Control Transmitter - Panasonic TH-42LF20U Operating Instructions Manual

Basic Controls

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
Standby (ON / OFF) button
The Display must fi rst be plugged into
the wall outlet and turned on at the power
switch (see page 14).
Press this button to turn the Display On,
from Standby mode. Press it again to turn
the Display Off to Standby mode.
POS. /SIZE button
(see page 23)
PICTURE button
(see page 25)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 24, 25, 26, 27)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
18
OFF TIMER button
The Display can be preset to switch to stand-by after
a fi xed period. The setting changes to 30 minutes,
60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
30 60
When three minutes remain, "OFF TIMER 3" will fl ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 23)
SET UP button (see page 21)
SOUND button (see page 27)
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode (see page 19)
2
Off timer
3
The off timer indicator is displayed only
when the off timer has been set.
Clock display (see page 43)
4
10:0 0
4
Digital Zoom (see page 20)
90
0
1
PC
4:3 2
OFF TIMER 90
3