GE Monogram ZISS480DRISS Owner's Manual page 12

Al_tomatic Icemaker
Built-ln H_/)'ig'erators
A newly-installed refrigerator may take
12-24 hours to begin maMng ice.
Tile icemaker will produce seven cubes per
cycle--approximately 15 cycles ill a 24-hour
period, depending on fl'eezer compartment
te_/ipeyattlye, yOOlll teI/lpeyattlye, ntlmbey of
door openings and other use conditions.
If the refl'igerator is operated beflwe the water
connection is made to the icemaker, set tile
power switch to 0 (off).
When the refrigerator has been connected
to the water supply, set the power switch to
I (on). Tile green light will come on.
Throw away the first full bucket of ice.
Be sure nothing interteres with tile sweep
of the teeler arm.
When tile bill fills to tile level of tile feeler
arm, tile icemaker will stop producing ice.
It is normal flw several cubes to be joined
together.
If ice is not used fl'equentlv, old ice cubes
will become cloudy, taste stale and shrink.
PowerSwitch
Iceroaker
Green Power
l.ight Feeler A rm
After tile icemaker has been turned on again,
there will be a delay of about 45 minutes
befl)re tile icemaker resumes operations.
NOTE: In homes with lowe>than-average
water pressm'e, you may hear tile icemaker
water valve cycle on several times when
making one batch of ice.
12