Table of Contents
Advertisement
The purpose of safety symbols
is to attract your attention to possible
dangers.
The safety symbols
and the explanations
with them deserve
your careful
attention
and understanding.
The symbol warnings
do not, by themselves,
eliminate
any danger. The instructions
and warnings
they give are no substitutes
for proper accident
prevention
measures.
_1, WARNING:
Be sure to read and understand
all safety instructions
in this
manual, including
all safety alert symbols
such as "DANGER,"
"WARNING,"
and
"CAUTION,"
before using this router. Failure to follow all instructions
listed in
this manual may result in electric shock, fire and/or serious personal injury.
SYMBOL
SIGNAL MEANING
SAFTY ALERT SYMBOL:
Indicates DANGER,
WARNING,
OR CAUTION.
May be used in conjunction
with other symbols
or pictographs
DANGER:
Indicates an imminently
hazardous
situation,
which, if not
avoided,
will result in death or serious injury.
_,
WARNING:
Indicates a potentially
hazardous
situation,
which, if not avoided,
could result in death or serious injury.
_1, CAUTION:
Indicates an imminently
hazardous
situation,
which, if not
avoided,
may result in death or serious injury.
Damage
Prevention
and Information
Messages
These inform the user of important
information
and/or instructions
that could
lead to equipment
or other property
damage
if they are not followed.
Each
message
is preceded
by the word "NOTE," as in the example below:
NOTE: Equipment
and/or property damage
may result if these instructions
are
not followed.
A_, WARNING:
To ensure safety and reliability,
all repairs should
be performed
at a Sears Parts & Repair Service Center.
_,
WARNING:
The operation
of any power tools can result in
foreign objects
being thrown
into your eyes, which can result
in severe eye damage.
Before beginning
power tool operation,
always wear safety goggles
or safety glasses with side shield
and a full face shield when needed. We recommend
a Wide
Vision Safety Mask for use over eyeglasses
or standard
safety
glasses with side shields. Always
use eye protection
which is
marked to comply
with ANSI Z87.1
SAVE THESE INSTRUCTIONS
Some of these following
symbols
may be used on this tool. Please study them
and learn their meaning.
Proper interpretation
of these symbols
will allow you to
operate the tool better and more safely.
27666
ManuaLRevised_11-0114
Page 3
Hide quick links:
Advertisement
Table of Contents
