Specifications - Craftsman 320.27666 Operator's Manual

PRODUCT SPECIFICATIONS
Rating 10.0 Amps
No Load Speed 10000-25000 RPM
Peak HP 1-3/4
Input 120-volt, 60Hz AC
Collets/Nuts and Cutter-bit Shank Diameters 1/4 in. and 1/2 in.
Plunge Base Diameter 6-11/16 inches
Sub-Base Opening (Diameter for cutter bit use) 1-1/4 inches
Sub-Base Thickness 1/4 inch
Plunge Base Depth of Cut 2-1/8 inches
_, WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
This Plunge Router has the following features:
1.
.
3.
4.
5.
8.
7.
8.
9.
Powerful, 10.0 Amp Soft Start Motor develops 1-3/4 Peak HP to handle
most routing jobs.
Variable-Speed Motor runs at 10,000 to 25,000 RPM (no-load speed).
Variable-Speed Dial allows matching proper speed to material and cutter
bit size.
Plunge Base features Fine and Micro Depth Rod Adjustments with Turret
Stops for precise set-ups and repetitive cutting.
Smooth Plunge Action lowers bit into workpiece at 90 ° for more accurate
cutting.
Protective Plunge Post Bellows protect guideposts from woodchips, dust,
and moisture.
Spindle Lock for easy one-wrench bit changes. Includes 1/4 and 1/2=inch
Self-Releasing Collets/Nuts for use with a wide variety of 1/4-in. and 1/2-in.
router bits, sold separately.
100% Ball Bearings for smooth, efficient operation and long life.
Base Features Large Base Openings and Large Chip Shield, combined
with 3 LED Worklights on Motor to provide high visibility of bit and
workpiece.
10. Durable Non=marring Sub-base glides smoothly over the workpiece. Sub-
base cutter bit opening is 1-1/4 inches. Do not use a bit with a cutter diameter
larger than 1-1/4 inches, as it will not pass through the sub-base opening!
27666 ManuaLRevised_11-0114 Page 13