Advertisement
Available languages
Available languages
EMOVAL &
STALLATION
..............................................
umt
............
: :_:
...................
CAUTION:
BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
•
Depress clutchjbrake pedal fully and set parking brake.
•
Place gearshift lever' in "NEUTRAL" position,
,
Place attachment clutch in "DISENGAGED"
position+
•
Turn ignition key "OFF" and remove key+
•
Make sure the blades and all moving parts have completely stopped+
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
PlUg.
.................
TRACTOR
TO REMOVE MOWER (See Fig. 1)
Mower' will be easier to remove from the right side of unit+
.
Place attachment clutch in "DISENGAGED" position+
•
Move attachment lift lever forward to lower mower to its
lowest position.
•
Roll belt off engine pulley+
•
Disconnect clutch rod from clutch lever' by removing
retainer-spring+
.
Disconnect suspension arms from rear deck brackets
by removing retainer' springs+
•
Disconnect-lront links from deck by removing retainer
springs.
•
Raise lift lever to raise suspension arms+Slide mower
out from under tractor'+
IMPORTANT:
IF AN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, BOTH
SUSPENSION
ARMS MUST BE REMOVED
FROM
TRACTOR,
TO INSTALL
MOWER (SEE FIG. 1)
•
Raise attachment lift tever to its highest position
•
Slide mower under tractor with discharge guard to right
side of tractor+
•
Lower lift lever to its lowest position_
•
Install mower in reverse order of removal instructions,
CLUTCH
ROD
CLUTCH LEVER
SUSPENSION
ARMS
RETAINER
SPRINGS
(both sides)
FIG=1
RETAINER
SPRING
ENGINE
PULLEY
RETAINER
SPRINGS
(both s!desl
LEVEL MOWER
DECK
(see "TO LEVEL MOWER DECK" in your tractor owner's
manual).
Advertisement
