Craftsman 917.249393 Owner's Manual page 13

t/4 LOCKNUTS TOP 1/4 LOCKNUTS
SPRING
HOOD
_.,., HINGE
SUPPORT POST
1/4 HEX
ASSEMBLY )LTS
1/4 HEX BOLTS
10o Mount hood hinge to grass catcher cover using (2)
I/4 hex bolts and (2) 1/4 Iocknuts (shown full size
below) (Fig,, 12 - upper inset).
Q
1 I Mount top cover to support post (Fig. 12) using
latch pin and retainer spring Retainer spring shown
full size below. Latch pin and retainer spring furnish-
ed with _rass catcher_
FIGURE 12
12_
I
Position the grass catcher container assemblies on-
to the support posts through the "'L "" slots (Fig, !3
- Inset)
BRACKET
_-"L" SLOT
SUPPOR! POST
LY
SUPPORT POST
ASSEMBLY
13
t
GRASS
CATCHER
•CONTAINER
°ASSEMBLIES
!
t
FIGURE 13