GE CTS18HBSDRWW Owner's Manual And Installation Instructions page 22

Installation Instructions
REVERSING THE DOOR SWING
(CONT.)
I-_REHANGING THE DOORS
6.1 Rehang the fresh food door
6.1.1 Lower tim fresh food door onto tim
bottom binge pin. Be sure the washer
is in place on the pin.
HingePin
Washer
I-_ REHANGING THE DOORS (CONT.)
6.2 Rehang the freezer door
6.2.1 Lower tim freezer door onto tim center
hinge pin. Be sure the washer and
spacer are in place on the pin.
andSpacer
6.1.2 Insert the pin on tim center hinge into tile
socket in tile top of tile dooL Place tile space_,
then tile washer, on tile hinge pin.
NOTE: Tile center hinge IIl/lst be turned over
as shown when mounted on tile left side.
Hinge_
andSpacer
6.2.2 Tilt tile door toward tile cabinet, lifting tile top
hinge so tile pin fits into tile socket on tile top
of tile dooL
6.1.3 Tilt tile door toward tile cabinet. As tile door is
brought into position, slide tile hinge under tile
head of the screw which earlier had been pardy
driven into tile outermost hole. Insert tile
remaining screw, then tighten both screws
securely.
6.2.3. Make sure tile door is slighdy above tile top of
tile cabinet and tile gap between tile doors is
even across tile flont. Tighten tile top hinge
screws. Do not overtighten these screws-tighten
them until they are just snug, then t/lIn them
another one-half t/lin.
22