Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Built-in style models (model PYE, CYE, and PWE) are
top heavy, especially with any doors open. These
models must be secured with the anti-tip floor
bracket to prevent tipping forward, which could
result in death or serious injury. Read and follow
the entire installation instructions for installing the
anti-tip floor bracket packed with your refrigerator.
Observe all governing codes
and ordinances. Save these instructions for local
Note to Installer – Be sure to leave these instructions with
Keep these instructions for future
Installation of this appliance requires basic
Refrigerator Installation can vary
Water Line Installation 30 minutes
under the Warranty.
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorway, the
refrigerator door and freezer drawer can be removed.
Freezer Drawer section.
WATER SUPPLY TO THE ICE MAKER AND DISPENSER
If the refrigerator has an ice maker, it will have to be
connected to a cold water line. A GE water supply
kit (containing tubing, shutoff valve, fittings and
instructions) is available at extra cost from your dealer,
by visiting our website at GEAppliances.com (in Canada
at www.GEAppliances.ca) or from Parts and Accessories,
800.626.2002 (in Canada 1.800.661.1616).
Tip Over Hazard.
TOOLS YOU MAY NEED
1/4" Outer Diameter
and Ferrule (sleeve)
1/8", 3/32", 1/4" & 5/32"
1/8" Drill Bit and
Electric or Hand Drill
Torx T20, T25
GE Café™ models
1/4" Nut Driver