GE CTS18HBSDRWW Owner's Manual And Installation Instructions page 19

Installation Instructions
I_ REMOVE THE FRESH FOOD
DOOR
3.1 Tape the door shut with masking rope.
3.2 Using a 5/16" hex-head socket screwdriver and
a 5/16" open-end wrench, remove the two
screws holding the center binge (and the shim
glued to it) to the cabinet. I,ift the center hinge
to flee its pin flom the socket in the top of the
door, and set hinge and screws aside. Be careful
not to lose the center hinge spacer and washer.
3.3 Remove dm tape and flit die door away flom file
cabinet. I,ift die door flom file pin in die bottom
hinge bracket. (If file plastic washer sticks to the
door bottom, put it back on file hinge.)
/
[_] REMOVE THE FRESH FOOD
DOOR (CONT.)
3.4 Set file door outside-,up on a non-scratching
StlIface.
3.5 Using a Torxdrive_; uansfer the two screws flom
the opposim side of the cabinet to the screw holes
vacated by the cenmr hinge removal.
3.6 Transfer file washer (if your model has one) m the
opposite side.
3.7 Take one of file screws removed in stop 2 and start
it in the oumrmost screw hole on the opposite side.
Do not drNe it all the way down-le_,e enough
space under the screw head for thickness of shim
and bracket.
0
19