Craftsman 320.16495 Operator's Manual page 43

4. It's recommended you
keep your machine stand
symmetrical by using the
same size and positioning of
side rails on opposite sides.
NOTICE: Ensure that the swivel
corners (B) are never diagonally
opposed to each other. The
assembly in Fig. 4b is incorrect
and will interfere with
the stand's mobility.
NOTICE: Insert the bolts so that
the nuts will be on the inside of the
mobile base.
5. Fully tighten all locking
nuts (Fig. 4a).
MOUNTING THE FIXED
WHEELS (Fig. 5)
Use the long bolts (G), wheel
bushings (L) and locking nuts (H) to
mounting the fixed wheels (E) to the
corners (A). Fully tighten the locking
nuts by turning them clockwise with
a wrench (not supplied).
_, WARNING: Be careful not to
over-tighten. Over-tightening will
prevent the wheel from moving.
/
Fig.
Fig. 5 H
A
E L
16495 Manual_Revised_12-0509 Page 11