Personal Safety - Craftsman 172.10856 Owner's Manual

ELECTRICAL SAFETY cont.
8. When operating a power tool outside, ALWAYS use an outdoor extension
cord marked "#V-A" or "W". These cords are rated for outdoor use and
reduce the risk of electric shock.
NOTE: The extension cord must have adequate wire size AWG
(American Wire Gauge) for safe, efficient use. Smaller gauge wires,
have greater capacity (16 gauge wire has more capacity than 18 gauge wire).
Minimum Gauge for Extension Cords (AWG)
Volts Total Length of Cord in Feet
120V 0 - 26 - 51 - 101 -
25ft. 50ft. 100 ft. 150 ft.
Ampere Rating AWG AWG AWG AWG
More than 0 16 16 16 14
Not more than 6
More than 6 16 16 14 12
Not more than 10
More than 10
Not more than 12 16 16 14 12
More than 12
Not more than 16 14 12 Not Recommended
PERSONAL SAFETY
1. ALWAYS stay alert, watch what you are doing and use common sense
when operating a power tool. DO NOT use tool while tired or under
the influence of drugs, alcohol, or medication. A moment of inattention
while operating power tools may result in serious personal injury.
2. ALWAYS dress properly. DO NOT wear loose clothing or jewelry. Pull
back long hair. Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3. ALWAYS avoid accidental starting. BE SURE switch is "Off" before
plugging in. Carrying tools with your finger on the switch or plugging in
tools that have the switch in the "On" position invites accidents.
4. ALWAYS remove adjusting keys or wrenches before turning the
tool "On". A wrench or a key that is left attached to a rotating part of the
tool may result in personal injury.
5. DO NOT overreach. ALWAYS keep proper footing and balance at all
times. Proper footing and balance enables better control of the tool in
unexpected situations.
6. ALWAYS use safety equipment. Always wear eye protection. Dust mask,
non-skid safety shoes, hardhat, or hearing protection must be used for
appropriate conditions.
4