Refrigerator; Installation Instructions; Preparing To Install The Reflig_Ramr - GE Profile PSF26NGPCBB Owner's Manual And Installation

Installation
Instructions
Refrigerator
Models 23, 25, 26, 27 & 29
I
BEFORE YOU BEGIN
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com
In Canada, call 1.800.361.3400 or Visit our Website at: geappliances.ca
Read these instructions completely
and carefully.
• iMPORTANT - Save t hese
instructions for local inspector's use.
• iMPORTANT - Observe all
governing codes and ordinances.
• Note to Installer - Be sure to Jeave these
instructions with the Consumer.
• Note to Consumer - Keep these
instructions for future reference.
• Skill level - Installation of this appliance
requires basic mechanical skills.
• Completion time - Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
if the refrigerator has already been installed,
remove the base grille (see Step 2 in Moving
the Refrigerator), then skip to Step 5 in
Installing the Refrigerator.
I
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have
to be connected to a cold water line. AGE
water supply kit (containing tubing, shutoff
valve, fittings and instructions) is available
at extra cost from your dealer, by visiting
our Website at go.corn (in Canada at
geappliances.ca) or from Parts and
Accessories, 800.626.2002 (in Canada
1.888.261.3055).
TOOLS YOU WILL NEED
3/8" and 5/16" Socket 1/2" and 7/16" Wrench
U
Plastic Putty Knife
Phillips Head Screwdriver
23