Consumer Information; If You Need Service - GE Monogram ZDBR240 Owner's Manual

Consumer Information
Beverage Center
If you received
The warranty does not cover damage
a
damaged
caused after delivery.
appliance
Immediately contact the dealer (or builder)
that sold you the beverage center.
Save time
& money
Before you request service, check the
Problem Solver in the back of this manual.
It lists causes of minor operating problems
that you can correct yourself.
Remove
packaging
Before using, be sure all packing materials
and tape have been removed.
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape on
new appliances is an application of
household liquid detergent. Apply with
a soft cloth and allow to soak. Wipe dry
and then apply an appliance polish to
thoroughly clean and protect the surface.
If you
need
service
To obtain service, see the Consumer
Services page in the back of this manual.
We are proud of our service and want you
to be pleased. If for some reason you are
not happy with the service you receive,
here are steps to follow for further help.
For customers in the USA:
FIRST,contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write
all the details-including your phone
number-to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY/40225
For customers in Canada:
FIRST,contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write
all the details-including your phone
number to:
Manager, Consumer Relations
Habe Canada Inc.
1 Factory Lane, Suite 310
loncton, N.B. EIC 9H3
After
installation
is completed
• Promptly inspect your new Monogram
beverage center. If it has been damaged,
contact the Installer or Dealer
immediately.
This beverage center must be properly
leveled to ensure correct door alignment
and door closure. Contact the Installer if
the unit is not level.
The unit should be centered in the
opening. The front face of the door should
be 1" forward of adjacent cabinetry.
Contact the installer if clearance is not
correct.
Test the door swing. Carefully open and
close the door. The door should not rub or
catch on adjacent cabinetry. Notify the
installer if the door makes contact with
cabinetry.
Please Contact the Installer or Dealer if
you experience any of these problems.
Your beverage center is shipped with a black
toekick on the front of the unit. For shipping
purposes, an optional stainless steel toekick
is secured to the back of the unit. That
toekick should have been removed and
installed, or given to you. Keep the unused
toekick and other unused or removed parts
for possible future use.