Table of Contents
Advertisement
rISk OF eLeCTrICaL ShOCk (continued)
Do not overload power outlets. Plug the AC adapter into the appropriate voltage
outlet.
Do not use extension cords. Plug the AC adapter directly into the electrical outlet.
Unplug the AC adapter from the electrical outlet after using the device.
Remove the AC adapter from the device after use.
Unplug the AC adapter from the electrical outlet before cleaning the device.
Do not pull the power cord of AC adapter strongly.
MaInTenanCe anD STOrage
Keep the device out of the reach of unsupervised infants and children. The device
may contain small parts that can be swallowed.
Do not leave the cleaning solution in the nebulizer parts. Rinse the nebulizer parts
with clean hot tap water after disinfecting.
Wash the nebulizer parts after each use. Dry the parts immediately after washing.
Do not store the air tube with moisture or medication remaining in the air tube.
This could result in infection as a result of bacteria.
Store the device and the components in a clean, safe location.
Do not carry or leave the nebulizer kit with medication in the medication cup.
Do not place or attempt to dry the device, components or any of the nebulizer parts
in a microwave oven.
Do not wrap the power cord around the compressor (main unit) and AC adapter.
SAfETy INfORMATION
8
- Quick Links:
- Preparing the Nebulizer for Use
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the INSTRUCTION MANUAL and is the answer not in the manual?
Questions and answers
how do you use it
Use the Omron instruction manual by following these steps:
1. Read Safety Information – Check warnings and precautions to ensure safe operation.
2. Follow Operating Instructions – Use the device only as intended, avoiding unauthorized modifications or repairs.
3. Use Approved Accessories – Only use Omron-authorized parts to maintain proper function and avoid damage.
4. Dispose Properly – Follow local regulations for disposing of the device and accessories to prevent environmental harm.
5. Check Technical Data – Refer to specifications for proper usage and maintenance.
6. Contact Support if Needed – Reach out to Omron customer service for further assistance.
This answer is automatically generated