Installation
Instructions
LEVEL THE FREEZER DOOR
[]
Locate the height adjuster in the freezer door.
Slightly loosen the four Phillips-head
screws
from the door on each side (right and left).
[]
Loosen the controller
screw with a Phillips-head
screwdriver
to adjust the level.
[_] LEVEL THE FREEZERDOOR (cont.)
[]
Find the best position to align the door slope.
Example: Theslopeis about2 mmas
shownbelow.
Rotate the height adjuster to +2.0 to reduce
the door slope.
rD-I After adjustment,
tighten all the screws.
[_
SET THE CONTROLS
Set the controls to the recommended
setting.
RECOMMENDED CONTROL SETTINGS J
©
©
REMOVE PACKAGING
A) Remove all tape, foam and protective
packing from shelves and drawers.
33