GE PFSS6SMXASS Owner's Manual And Installation Instructions page 30

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
[] REMOVE THE FREEZER DOOR (cont.)
[] Usethe tip of a screwdriver to separate the rail from
the rail cover.Tilt the front end up and lift the entire door.
[] Set the door front on a nonscratching surface.
[] Pushthe rail assemblies back into the cabinet.
-& CAUTION:
P ushboth sides of the rail
assemblies back at the same time.
REPLACING THE FREEZER DOOR
Two people may be required to complete this procedure.
ATTACH AND SECURE THE DRAWER FRONT TO
THE SLIDES
_'1 Pullout the rail assembliesto the full length on each side
of the cabinet.
CAUTION:
Make sure to pull out the side
railsevenly.
[] REPLACING THE FREEZER DOOR (cont.)
[] Hung the freezer door front onto open slots
on the sides.
Slot
r_ Tighten screws completely. (Thereare four
10 mm hex-head bolts.)
REPLACE THE FREEZER BASKET
Replacethe freezer basket by lowering it into the frame.
3O