GE Zoneline 5200 Series Owner's Manual page 12

1 Remove the room cabinet.
2 Install the power supply kit per the
instructions in the kit.
3 See the special instructions below for
applicable supply voltages.
4 Reinstall the room cabinet.
A power supply kit must be used to supply
power to the Zoneline unit. The appropriate
kit is determined by the voltage, the means of
electrical connection and the amperage of the
branch circuit.
Connections of 208 or 230 volt circuits may be
with a power supply kit or a junction box kit.
All wiring, including installation of the
receptacle, must be in accordance with the NEC
and local codes, ordinances and regulations.
Tandem Perpendicular Large Tandem
15 Amp. 20 Amp. 30 Amp.
Electrical wiring wall outlets 230/208 volts.
Power supply kit
/2