GE Zoneline 5200 Series Owner's Manual page 11

Important Electrical Safety-Read Carefully
Installer: Leave these instructions with the Zoneline.
Owner: Keep these instructions for future use.
• Follow the National Electrical C( _ )de (NEC) or
local codes and ordinances.
• For personal
safety, this Zoneline must be prop-
erly grounded.
• Protective devices (fllses or circuit breakers)
acceptable fi_r Zoneline installations are speci-
fied on the nameplate of each unit.
,_ CAUTION:
• Do not use an extension cord with this uniL
• Aluminum building wiring may present special
problems--consult a qualified electrician.
• When the unit is in the STOP position there is still
voltage to the electrical controls.
• Disconnect the power to the unit before servicing
by:
1 Removing the power cord (if it has one) from the
wall receptacle.
or--
2 Removing the branch circuit fuses or turning the
circuit breakers off at the panel
zo.e i. Compo.e ts
YOU WILL NEED: • UniversaI power connector kit
• Phillips screwdriver
Exterior grille/louver** Wall case** Zoneline unit Room cabinet*
,1 ! !
*Shipped with the Zoneline unit
**Check the "Essential Elements" list on the unit
Power supply kit**
!
11