Monogram ZEU365B1WG Owner's Manual page 12

Touch Sensor Controls
Digital R_i<ti_i_t (7ookt@
CTTOT COO[€
Ifan ellor octursin the (ontro] operation,
all the displays will flash "E" or "F" anti the
cooktop will beep.
To correct:
L Touch any ON/OFF pad to reset the
control.
2, if this corre( ts the problem, set the
control to the desired setting to begin
3. If d_e error is not ( leafed, allow the ( ooktop
to cool completely.
4. After cooling, touch any ON/OFF p_d again
to reset the control.
5. if' the error is still not cleared, turn off the
cooktop power at die circuit breaker or fl_se
box for one minute.
6, if the error reappears turn off the ( ooktop
power and (:all for service.
After a power fifilure, when power is restored,
the unit will show flashing "8" in the COlm-ol
displays fbr a fFw seconds and then return to
the normal OFF positioIL
If a momentm T power fifihne occurs during
cooktop use all suifhce units _dll tuin off and
will stay offwhen power is restored. When
power is first restored the cooktop displays will
flash all 8's fi)r a few seconds during which
time the COlm-ol will be checking the circuits
tbr proper operation. Set the COlm-ol to the
desired setting to begin cooking again.
12