Download Print this page

Craftsman 107289850 PGT9500 Operator's Manual page 16

30/54" 2wd
Hide thumbs Also See for 107289850 PGT9500:

Advertisement

Dashboard Display
& Functions
Display
Items
Refer to Figure 2.
A. Fuel Level
Indicates the amount of fuel in the fuel tank (A). Left is
empty; right is full.
B. Hour Meter / Clock / Service Indicator
Displays the clock, hour meter, and maintenance re-
minder.
C. Select Button
Used to set the clock and reset the maintenance remind-
er.
D. Set Button
Used to set the clock and reset the maintenance remind-
er.
E. PTO Light
Indicates the PTO switch is in the ON position.
F. Cruise Control Light
Indicates that the cruise control is engaged.
G. Low Oil Pressure Light
Indicates that the engine oil pressure is low. The light
will turn on when the tractor is first started and then go
out. IF THIS LIGHT TURNS ON WHILE THE TRAC-
TOR IS IN USE, TURN THE ENGINE OFF IMMEDIATE-
LY. Contact your authorized dealer for service.
H. Low Voltage Light
Indicates that the electrical system voltage is low. The
light will turn on when the tractor is first started and then
go out. IF THIS LIGHT TURNS ON WHILE THE TRAC-
TOR IS IN USE, TURN THE ENGINE OFF IMMEDIATE-
LY. Contact your authorized dealer for service.
o
I[
e
I
9
formation
J
;i;e
I
®
©
FIGURE 2
Functions
Dashboard Display Models (See Figure 2)
Display Total Running
Hours - When the key switch
is first turned to the RUN position, all warning indicators
will light and the total running hours will be displayed. Be
sure all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the PTO,
and turn the key to RUN (engine off).
Set the Clock - Start the engine, leave the engine run-
ning. Depress the select button (C) for three (3) seconds
and release. Depress set button and HOLD to advance
time. Depress select button to select minutes. Depress
and HOLD set button (D) to advance time. Leave alone
for 5 seconds and clock will activate. Shut off engine.
Demonstration
Mode - With the engine off, hold down
the set button (D) and turn the key switch to RUN.
Maintenance
Reminder - A maintenance reminder
will display in the information window (B) after the first 5
hours of operation, and then after every 50 hours. The re-
minder will automatically reset after 5 hours. The remind-
er can be manually reset by turning the key switch from
OFF to RUN (with engine off) and then depressing the set
(D) and select (C) buttons simultaneously for 5 seconds.
16

Advertisement

loading

This manual is also suitable for:

Pgt9500