Electrical Connection - Craftsman 315.275100 Owner's Manual

FEATURES
REAR VIEW OF ROUTER
DEPTH
CONTROLKNOB
POWER CORD
LOCK-ON
BUTTON
ON-OFF
TRIGGER
SWITCH
HANDLE
5116-16 UNC-2B
ROUTER BASE
SUBBASE
COLLETNUT
HEX NUT
4
STOP
FLANGE
LOCK
HANDLE
PLUNGE
LOCK
ACTUATOR
Fig. 2
ELECTRICAL CONNECTION
Your router has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only
(normal household current). Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will cause
a loss of power and the motor will overheat. Ifyour tool does not operate when plugged into an outlet, double-check the power
supply.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields, available at Sears Retail Stores.
Paoe 7